Milwaukee M18 FUEL Branch Conduit Bender with AUTO-ZERO M18 5150-20
MAXIMIZE MULTI-RACEWAY PRECISION AND ELIMINATE HAND-BENDING FATIGUE
When you're facing a massive parallel rack of 1-inch EMT, the last thing you need is the inconsistency of a foot bender or the bulk of a table-top unit. The M18 FUEL Branch Conduit Bender is the industry's first portable cordless solution designed specifically for the high-volume branch circuit installations found in commercial and industrial environments. By integrating AUTO-ZERO technology, this bender automatically senses the 0° starting point on every single cycle, ensuring that your offsets, saddles, and 90s are perfectly uniform across the entire run. This precision significantly reduces friction during wire pulls and ensures your conduit enters the panel or junction box with professional-grade alignment every time.
- / AUTO-ZERO Technology automatically senses 0° for unrivaled bend accuracy and consistency across multi-pipe installations.
- / Optimized for branch circuits with a capacity of up to 1" EMT and 3/4" RMC/IMC, allowing for point-of-installation bending.
- / Ergonomic working height and orientation keep bend planes visible while reducing lower back strain by up to 10X compared to manual bending.
- / POWERSTATE Brushless Motor delivers the torque needed to handle rigid conduit with up to 110 bends on 3/4" EMT per charge using an XC5.0 battery.
TECHNICAL SPECIFICATIONS
| Voltage | 18V |
| Battery System | M18 FUEL |
| EMT Capacity | 1/2", 3/4", 1" |
| Rigid/IMC Capacity | 1/2", 3/4" |
| Bending Technology | AUTO-ZERO™ |
| Tool Weight | 41.0 lbs |
| Dimensions (LxHxW) | 28.6" x 39.5" x 46.5" |
WHAT'S IN THE BOX
(1) M18 FUEL Branch Conduit Bender w/ AUTO-ZERO (5150-20), (1) 3/4" EMT / 1/2" RMC Conduit Bending Shoe (49-16-0034), (1) 1" EMT / 3/4" RMC Conduit Bending Shoe (49-16-0001), (1) Tripod, (1) Backformer
Original: $2,999.00
-70%$2,999.00
$899.70
Description
MAXIMIZE MULTI-RACEWAY PRECISION AND ELIMINATE HAND-BENDING FATIGUE
When you're facing a massive parallel rack of 1-inch EMT, the last thing you need is the inconsistency of a foot bender or the bulk of a table-top unit. The M18 FUEL Branch Conduit Bender is the industry's first portable cordless solution designed specifically for the high-volume branch circuit installations found in commercial and industrial environments. By integrating AUTO-ZERO technology, this bender automatically senses the 0° starting point on every single cycle, ensuring that your offsets, saddles, and 90s are perfectly uniform across the entire run. This precision significantly reduces friction during wire pulls and ensures your conduit enters the panel or junction box with professional-grade alignment every time.
- / AUTO-ZERO Technology automatically senses 0° for unrivaled bend accuracy and consistency across multi-pipe installations.
- / Optimized for branch circuits with a capacity of up to 1" EMT and 3/4" RMC/IMC, allowing for point-of-installation bending.
- / Ergonomic working height and orientation keep bend planes visible while reducing lower back strain by up to 10X compared to manual bending.
- / POWERSTATE Brushless Motor delivers the torque needed to handle rigid conduit with up to 110 bends on 3/4" EMT per charge using an XC5.0 battery.
TECHNICAL SPECIFICATIONS
| Voltage | 18V |
| Battery System | M18 FUEL |
| EMT Capacity | 1/2", 3/4", 1" |
| Rigid/IMC Capacity | 1/2", 3/4" |
| Bending Technology | AUTO-ZERO™ |
| Tool Weight | 41.0 lbs |
| Dimensions (LxHxW) | 28.6" x 39.5" x 46.5" |
WHAT'S IN THE BOX
(1) M18 FUEL Branch Conduit Bender w/ AUTO-ZERO (5150-20), (1) 3/4" EMT / 1/2" RMC Conduit Bending Shoe (49-16-0034), (1) 1" EMT / 3/4" RMC Conduit Bending Shoe (49-16-0001), (1) Tripod, (1) Backformer
